Executive Series Display Models

On March 1973, there was a production of thirty F15A and B aircrafts. The first F15, TF-15A 73-0108 was for an operational USAF unit. The said F15 was a replacement training unit for F15 operations during the first stage of the introduction of the Eagle into service. Winter of year 1974 to 1975, McDonnell altered the F-15A serial number 72-0119 to set the world time in order for him to climb records. The said project was called Streak Eagle. To rid of some weight for this project, all...

The F-16 Fighting Falcon is a compact, single-engined jet fighter aircraft manufactured by General Dynamics and later Lockheed Martin for the United States Air Force (USAF). Though designed as a lightweight fighter, it has evolved into a successful multirole aircraft. It is highly maneuverable and has proven its worth in air-to-air combat and air-to-surface attack. The Falcon is the largest Western fighter program with over 4,000 aircraft built since its production in 1976. Though no longer...

The B-52 Stratofortress is a long-range, jet strategic bomber that replaced the Convair B-36 and the Boeing B-47. On November 23, 1945, Air Materiel Command, a former USAF command, issued desired performance characteristics for a new strategic bomber. Boeing, Consolidated Aircraft and Glenn L. Martin Company all submitted proposals, with Boeing winning the design competition. The B-52 was designed to reduce the overall aircraft weight in an effort to improve performance and has the longest...

The Boeing E-8C Joint Surveillance Target Attack Radar System (Joint STARS) is a United States Air Force (USAF) airborne battle management and command and control asset. Its primary role is to provide dedicated support of ground and air theater commanders. The E-8C can respond quickly and effectively to support worldwide military contingency operations, capable of evaluating enemy situation by conducting ground surveillance. It is a jam-resistant system, able to operate despite experiencing...

Space Shuttle Atlantis made its maiden flight in October 1985, and made its last flight in July 2011, the last flight before the Shuttle program ended. This final flight brought additional supplies to the International Space Station. By the end of its final mission, Atlantis had orbited the Earth 4,848 times, traveling nearly 126,000,000 mi in space or more than 525 times the distance from the Earth to the Moon.One of Atlantis' notable missions was STS-71, which marked a number of firsts in...

This handcrafted model is painted in the same paint scheme as the original and is painstakingly built from Philippine mahogany by our skilled craftsmen. Perfect as a gift for any aviation enthusiast and history buff!

STOVL F35B USMC by TMC Pacific ModelworksItem Number: CF035BMCCTP

CARRIER VERSION F35C USN by TMC Pacific ModelworksItem Number: CF035CNCCTP

B767-300 Air Canada (1:100) by PacificItem Number: KB767ACTR

Apollo Capsule by TMC Desktop ModelsItem Number: MN11064Length is 5 1/2" and wingspan is 5 3/4". Launched July 16, 1969 at 9:32 A.M. EDT., The Apollo 11 Mission was the first manned mission to land on the Moon. It was the fifth human spaceflight of Project Apollo and the third human voyage to the Moon or Moon orbit. It carried Mission Commander Neil Alden Armstrong, Command Module Pilot Micheal Collins, and Lunar Module Pilot Edwin Eugene 'Buzz' Aldrin, Jr. On July 20, Armstrong and Aldrin...

Gemini IV Capsule by TMC Desktop ModelsItem Number: MN11063

Mercury Capsule by TMC Desktop ModelsItem Number: MN11062

Extra Long Wall Mount by TMC Desktop ModelsItem Number: W-2XLT

The X-4 Bantam is an aircraft designed and built by Northtop Aircraft Inc for NACA (now NASA). It is a single-place, low swept-wing and semi-tailless and had no horizontal tail surfaces. The X-4 emphasizes the importance of tail surfaces for proper control effectiveness in the transonic speed range and was also used to investigate the characteristic problems of tailless airplanes at low speeds, such as marginal longitudinal stability and control. This handcrafted model is painted in the same...

This handcrafted model is painted in the same paint scheme as the original and is painstakingly built from Philippine mahogany by our skilled craftsmen. Perfect as a gift for any aviation enthusiast and history buff!

P-51D Mustang by TMC Pacific Desktop Airplane ModelsItem Number: AM07003

This handcrafted model is painted in the same paint scheme as the original and is painstakingly built from Philippine mahogany by our skilled craftsmen. Perfect as a gift for any aviation enthusiast and history buff!

This handcrafted model is painted in the same paint scheme as the original and is painstakingly built from Philippine mahogany by our skilled craftsmen. Perfect as a gift for any aviation enthusiast and history buff!

F-35 JSF Collection (1:72) by TMC Pacific Desktop Airplane ModelsItem Number: CFJSFC

The Northrop Grumman X-47B is a demonstration unmanned combat air vehicle (UCAV) designed for carrier-based operations. Developed by the American defense technology company Northrop Grumman, the X-47 project began as part of DARPA's J-UCAS program, and subsequently became part of the United States Navy's Unmanned Combat Air System Demonstration (UCAS-D) program. The X-47B is a tailless jet-powered blended-wing-body aircraft capable of semi-autonomous operation and aerial refuelling. The X-47B...

The MQ-9 Reaper (originally the RQ-9 Predator B) is a medium-to- high altitude, long endurance remotely piloted aircraft system. It was developed by General Atomics Aeronautical Systems for use by the United States Air Force, United States Navy, and British Royal Air Force. "M" is the Department of Defense designation for multi-role, "Q" means unmanned aircraft system, and "9" refers to the series of purpose-built remotely piloted aircraft systems. The Reaper's primary mission is as a...

Pilatus PC-12 " Pinnacle " (1:40) by TMC Pacific Desktop Airplane ModelsItem Number: KPPC12PTR

Ares I was the crew launch vehicle that was being developed by NASA as part of the Constellation Program.The name "Ares" refers to the Greek deity Ares, who is identified with the Roman god Mars. Ares I was originally known as the "Crew Launch Vehicle" (CLV). This handcrafted model is painted in the same paint scheme as the original and is painstakingly built from Philippine mahogany by our skilled craftsmen. Perfect as a gift for any aviation enthusiast and history buff!

This handcrafted model is painted in the same paint scheme as the original and is painstakingly built from Philippine mahogany by our skilled craftsmen. Perfect as a gift for any aviation enthusiast and history buff!