US Navy World War Two Wings & Insignia

This is a very museum qualityreproduction of a 1930' US Navy Pilots Wing designed by NS Meyer with a pin back in 2 3/4 inch wide, made in Brass with a 24 karat gold plate. Old wings such as this are rare and expensive.

A set of the two very hard to find Navy Raincoat size insignia rank for Admiral of the Navies. This size was made for the Navy only and is called the Raincoat size. The Navy did not have a uniform 5 star because they wear shoulder boards and they needed a rank for their raincoats. This is sized between the full uniform and collar size and made in sterling silver. Silver ones are even harder to find than the regular plated metal units. Sold in a set of two. These are clutch backs as that is the...

USMC Colonel or Navy Captain Collar Insignia Sterling in accordance with current regulation in the collar size.

During World War II fast Motor Torpedo Boats were build by various manufacturers. At that time each manufacturer made pins to give to crew members who manned the boats they build. These became the unofficial "wings" of the crews. Silver for enlisted and gold for officers. The Vosper was a British build fast boat. Also two types of badges were sometimes made, moving at speed or slow waves. This is a sterling reproduction of a Vosper badge for an officer at speed with a 24k gold plate. This...

This is museum quality reproduction of an extremely rare WWII Navy Pilots Wing in Sterling Silverwith a 24 k Gold Plate. These unofficial wings were worn by the pilots of the Boeing 314 Clipper aircraft. Only six of these aircraft were used by the Navy. The result very few of these wings.. A picture is shown in US navy Wings of Gold on page 75. The wing is a Vanguard designed wing with a small Clipper over the shield. While not an original here is a chance to get one of these unusual wings in...

Sterling US Navy Submarine badge in a tie tack.Note picture is of the charm.

Navy Wings of Gold by Ron Willis and Thomas Carmichael and what is very unusual about this wing is that it is long and thin the wing is actually 2 5/8 by 5/8 but looks longer because of it design. Another interesting fact is that it is sterling and is not gold plated making this an unusual wing for the Navy. Just silver in color as was the original. Also that it is part of a series of four wings with one for the Army, Medical Corp and the Air Corp. This is an museum quality reproduction and...

World War II Submarine Combat Patrol Badge of the "Deep Wave" style with the H&H hallmark. This is considered one the best designs in deep wave and a companion badge to the Deep Wave Submarine badge. For more information see US Silent Service by David A. Jones. This reproduction is sterling and is very thick for a WWII badge. This was not a very common badge and is rather rare. This badge has three combat stars if you win this auction by adding $4. 00 for every star you want.

World War II Submarine Badge of the "Deep Wave" with the H&H hallmark. This is considered the best design in deep wave and was used by VADM Charles Lookwood as an award in 10k gold those would become members of the "Rollof Honor. " For more information see US Silent Service by David A. Jones. This museum quality reproduction is made in sterling silver as an enlisted version. Enlisted metal submarine badges were no official during WWII.

World War II Submarine Badge of the "Deep Wave" with the H&H hallmark. This is considered the best design in deep wave and was used by VADM Charles Lookwood as an award in 10k gold those would become members of the "Roll of Honor." For more information see US Silent Service by David A. Jones. This reproduction is sterling with a 24k gold plate.

This is museum quality reproduction in sterling silver of very rare WWII Colonel Insignia made by Luxenberg. One of the most desirable insignia makers. These are called War Eagles because the head of the eagle is facing the arrows. In official Colonel insignia the head of the eagle faces the olive branch. You are bidding on a set of two in the large collar size. These are 1 1/2 inch wingspan. Luxenberg Class A uniform insignia, Colonel rank. Here is a chance to own a set of these until you...

The is a museum quality reproduction of the WWII Submarine Deep Wave Badge by H&H in the rare garrison or overseas cap. The deep wave badges do have a much nicer look than the standard Dolphins. This is the reproduction of the H&H designed badge is made in sterling silver with a 24k gold plating They are also much harder to find. A great item to fill a hole in a collection until a real one comes along.

This is a museum quality reproduction of a very rare pin that was given to factry workers who made the Higgins PT boats. The pin is in sterling silver and is 2 1/2 inches wide. Notice the word Higgins is in raised letters on the front of the boat. An extremely rare PT boat pin.

This is a museum quality reproduction of the standard WWII submarine badge by Meyer in sterling silver with a 24k gold plating. The hallmarks are correct for WWII. The badge is 2 3/4 inches wide and has a pin back.

On 29 July 1942 the Navy announced this wing for Naval Flight Surgeons. What is very interesting was a requirement that the wing be of a dull finish in gold with a silver acorn. This is a museum quality reproduction of the Meyer design in Sterling Silver with a 24 karat gold plate. This wing is 2 3/4 inches with a pin back.

This is a museum quality reproduction of the WWII Navy Flight Surgeon Wings, shirt size. The Flight Surgeon wings were announced on 29 July 1942. One of the requirements was that the gold was to be dull and the acorn silver. This wing is made of Sterling Silver with a 24 karat gold plate, except on the acorn.

This is a museum quality reproduction of a very rare Australian made US Navy Wing by Angus and Coote. The Angus and Coote hallmark is in raised letters on one side of the wing and on the other is Sydney. The wing is made of sterling silver with a 24k gold plate. Australian wings are highly prized by collectors and very rare.

This is a museum quality reproduction of a very unusual and rare Navy Pilot wing of WWII. The wing is shown on page 71 of the book United States Wings of Gold. Notice this wing does not have berries in the shoulder so many may think it was pre-war. Also it was jeweler made and not mass produced by one of the wing manufacturers making it very hard to find. The original was cast as is this reproduction.

This is museum quality reproduction of a WWII Navy Pilots Wing in Sterling Silverwith a 24 k Gold Plate. The only hallmark is sterling, but thi is a very nice looking example of a WWII Navy wing.

This is a museum quality reproduction of a Vanguard designed wing of WWII for a Naval Pilot made of sterling silver with a 24 karat gold plate. A picture of this wing is shown in US navy Wings of Gold on page 64.

Actually it is not a wing but a Qualification Badge but that is used to help people find it on eBay. This is a museum quality reproduction of the famous WWII Navy Submarine wing badge in sterling silver. It has a pin back just as the original badge and is hallmarked SS224. This is a very nice version of the submarine badge. The SS224 on the back means the man qualified aboard the USS Cod SS 224. The USS Cod is on display in Cleveland Ohio. This would have been un-offcial in WWII. Metal...

Actually it is not a wing but a Qualification Badge but that is used to help people find it on eBay. This is a museum quality reproduction of the famous WWII Navy Submarine wing badge in sterling silver with 24k plated surface. It has a pin back just as the original badge and is hallmarked SS224. This is a very nice version of the submarine badge. The SS224 on the back means the man qualified aboard the USS Cod SN 224. The USS Cod is on display in Cleveland Ohio. Only about 1 in 100 qualify to...

Actually it is not a wing but a Qualification Badge and one of the hardest to earn. Only about 1 in 100 qualify to be on a sub. I used the name wing to help people use the ebay search engine. This is a museum quality reproduction of the famous WWII Navy Submarine wing badge in sterling silver with 24k plated surface. It has a pin back just as the original badge and is hallmarked Blackinton which is a very rare hallmark for a sub badge. This is a very nice version of the submarine badge.

This is a museum quality reproduction of the famous WWII Navy Submarine Combat Patrol Badge in sterling silver. It has a pin back just as the original badge and has the three holes for combat stars. We can add the combat stars with the look of theater soldered install. This is not easy to do with sterling. Just add $4. 00 per star.

Actually it is not a wing but a Qualification Badge and one of the hardest to earn. Only about 1 in 100 qualify to be on a sub This is a museum quality reproduction of the famous WWII Navy Submarine Supply Officer wing badge by Gemsco in sterling silver with 24k plated surface. It has a pin back just as the original badge and is hallmarked H&H and in the Deep Wave version which is a very rare for a sub badge. This is a very nice version of the submarine badge.

Actually it is not a wing but a Qualification Badge and one of the hardest to earn. Only about 1 in 100 qualify to be on a sub This is a museum quality reproduction of the famous WWII Navy Submarine Supply Officer wing badge in sterling silver with 24k plated surface. It has a pin back just as the original badge and is hallmarked H&H and in the Deep Wave version which is a very rare for a sub badge.

This is a very unusual design for the PT Boats insignia. It was one made by Herreshoff a US yacht builder that build about 100 PT boats between 1940 and 1944 in Bristol, Rhode Island. The PT boats they made were based on the Vosper design and sold to Britain and Russia; none went to the US Navy. This is a museum quality reproduction of this badge with the hallmark sterling in raised letters and an exact copy of the clasp that was used. Here is your chance to own a museum quality reproduction...

During World War II fast Motor Torpedo Boats were build by various manufacturers. At that time each manufacturer made pins to give to crew members who manned the boats they build. These became the unofficial "wings" of the crews. Silver for enlisted and gold for officers. Also two types of badges were sometimes made, moving at speed or slow waves. This is a sterling reproduction of an Higgins badge for an enlisted crew. This badge is 2 9/16 inches as was the original.

During World War II fast Motor Torpedo Boats were build by various manufacturers. At that time each manufacturer made pins to give to crew members who manned the boats they build. These became the unofficial "wings" of the crews. Also various insignia manufacturers made these badges. Silver for enlisted and gold for officers. Also two types of badges were sometimes made, moving at speed or slow waves. This is a sterling reproduction of a Robbins designed badge for an enlisted crew. This badge...

During World War II fast Motor Torpedo Boats were build by various manufacturers. At that time each manufacturer made pins to give to crew members who manned the boats they build. These became the unofficial "wings" of the crews. Silver for enlisted and gold for officers. The Vosper was a British build fast boat. Also two types of badges were sometimes made, moving at speed or slow waves. This is a sterling reproduction of a Vosper badge for an enlisted crew member at speed. This badge is 2...

Sitting Duck membership pin (aka Sea Squatters Club) I bet you can guess what that means. Here is another of those unofficial British awards, that you would rather not have. It joins the Order of the Boot but for those who like to sit in a raft in the channel waiting to be picked up. But it is better to have made it into the water than not to have made it at all or being captured. Gold plated sterling with screw backs,

The is a museum quality reproduction of the WWII Submarine Deep Wave Badge by Gemsco. The deep wave badges do have a much nicer look than the standard Dolphins. This is the reproduction of the GEMSCO designed badge. They are also much harder to find.

This is a museum quality reproduction of an extremely rare and sort after WWII sweetheart pin. This pin is 1 3/8 inches tall and made in sterling silver as was the original. A mermaid is a legendary aquatic creature with the upper body of a woman and the tail of a fish. Mermaids are sometimes depicted as perilous creatures associated with floods, storms, shipwrecks, and drowning. In other folk traditions they can be benevolent, bestowing boons or falling in love with humans. In 2012 the...

WWII US Navy Landing Ship Tank (LST) sterling silver sweetheart pin of the LST 157. The pin is 2 1/4 inches wide. LST-157 was laid down on 25 June 1942 at Evansville, Ind. , by the Missouri Valley Bridge & Iron Co. launched on 31 October 1942, sponsored by Mrs. DeWitt C. Redgrave, Jr. ; and commissioned on 10 February 1943. During World War II, LST-157 served in the European and participated in the following operations :Sicilian occupation - July 1943Salerno landings - September 1943Invasion...

This is a museum quality reproduction of a WWII Navy Pilot wing for wear on the garrison cap. This is the classic WWII designa and could still be worn today. The wing is 1 5/8 inches wide and is gold plated sterling silver.